Luis and I have covered the DIN / Argonaut/double hose subject pretty thoroughly in many other threads on the forum. I will not manufacture a DIN for the Argonaut.
Sent from my SGH-T989 using Tapatalk
Automan wrote:Fitted, ready for action (if the weather ever gets better)
Fitted them dry and about 4N-m (36in-lbs) on a 6mm Allen Key
Is that okay?
Many thanks
Automan wrote:Fitted, ready for action (if the weather ever gets better)
Fitted them dry and about 4N-m (36in-lbs) on a 6mm Allen Key
Is that okay?
Many thanks
Hello Bryan, from the picture I can not understand what has to be in contact with the metal ( the bottom ).. the gasket or the ring .Bryan wrote:Photo
Backup washer will fit inside O-ring. Install as shown in picture below and torque to Aqua Lung specifications.annisf wrote:Hello Bryan, from the picture I can not understand what has to be in contact with the metal ( the bottom ).. the gasket or the ring .Bryan wrote:Photo
Thank you
Francesco
Users browsing this forum: No registered users and 19 guests