User avatar
Turtleguy9
Skin Diver
Posts: 42
Joined: Sun Jun 26, 2005 1:59 am
Location: Caldwell Idaho
Contact: Website

Refresh, Rebuild or Have Restored?

Thu Sep 23, 2021 4:51 pm

Ok, after all these years, I found my Grail regulator. The question is to refresh for display? Rebuild for use? Or have it restored?
You do not have the required permissions to view the files attached to this post.

swimjim
Master Diver
Posts: 1694
Joined: Thu Mar 23, 2006 12:28 am
First Name: Jim
Location: Belgium WI

Re: Refresh, Rebuild or Have Restored?

Thu Sep 23, 2021 10:21 pm

I have a little rule in my collection. If I cannot make it work, it's down the road. If I cannot dive it, it's down the road. I'd rebuild it as a diver and leave the outside coatings alone as much as possible. It may not be a "10", but it's a great piece and an awesome addition to any collection.

User avatar
Bryan
Plank Owner
Posts: 5279
Joined: Fri Jun 24, 2005 11:40 am
First Name: Bryan
Location: Wesley Chapel Florida
Contact: Website

Re: Refresh, Rebuild or Have Restored?

Tue Sep 28, 2021 6:27 pm

swimjim wrote:
Thu Sep 23, 2021 10:21 pm
I have a little rule in my collection. If I cannot make it work, it's down the road. If I cannot dive it, it's down the road. I'd rebuild it as a diver and leave the outside coatings alone as much as possible. It may not be a "10", but it's a great piece and an awesome addition to any collection.
What Jim said.
Doing it right should include some common sense, not just blindly following specs and instructions. .Gary D, AWAP on SB

User avatar
1969ivan1
Plank Owner
Posts: 1646
Joined: Sat Jun 25, 2005 12:15 pm
First Name: rob
Location: CINCINNATI, OHIO

Re: Refresh, Rebuild or Have Restored?

Wed Sep 29, 2021 8:08 pm

Dive it Turtleguy!!!

h2operations
Master Diver
Posts: 107
Joined: Fri Jun 29, 2018 9:40 pm
First Name: Paul
Location: Coronado CA

Re: Refresh, Rebuild or Have Restored?

Thu Nov 04, 2021 4:52 pm

1.Rebuild
2.Dive
3.Put on Desk Display
4.Repeat steps 2 and 3

Return to “General Discussions”

Who is online

Users browsing this forum: No registered users and 46 guests