1959 USD NOS 1/2" npt tapered threads. Don't have a pic of the other side currently, but looks like it takes standard 3/8" discs.tbone1004 wrote: ↑Sun Jul 28, 2019 9:40 pm... if you are adamant about having the right discs you're going to have to let us know which valves you have and then we can help a bit more accurately
http://www.northeastscubasupply.com/bur ... red&page=1
Ok, Eben, that's just weird in that I went through the EXACT same mental calculus last night and reached the same conclusion.SurfLung wrote: ↑Mon Jul 29, 2019 11:16 amNot So Fast... Check the BLOW pressure
Here's my thinking: - If you figure an 1800 psi tank is okay for 10% overfill... We're almost talking about a 1980 psi working pressure. 5/3rds of that is 3300 psi. So, if you can't find any 3000 psi "blow" disks, 3360 is at least in the ball park.
Thanks Allan,
Per Rob, they are 3000 psi working pressure so back to the drawing board. Thanks for your input. Appreciated. MarkScubaLawyer wrote: ↑Mon Jul 29, 2019 1:15 pmThanks Allan,
I've emailed Rob to see if his 3000psi discs are working pressure or release pressure. Mark
Email sent to my SHF dive buddy!
Users browsing this forum: No registered users and 7 guests