- Thanks Antique. I was hoping you would help me. Here's a picture of the control box:antique diver wrote:... we can delve further into that if or when you want or need to know more. Feel free to contact me by PM or email.
- Can I plug this thing in and turn it on without damaging anything? I'd like to see if it'll pump up the back pressure.antique diver wrote:BTW, the PMV is usually mounted at the discharge side of the filter, but on the Rix it is recommended to have one where yours is to hold back some pressure on the final piston as quickly after startup as possible. It is a floating piston, driven by a sort-of "piston" that is attached to piston rod, and the air pressure holds them together to keep from banging the two together excessively.
SurfLung wrote:- Should I be considering this: http://www.ebay.com/itm/Water-moisture- ... 4897.l4275
Moisture separator by Walter Kidde Company. Proof pressure 3000 p.s.i., Minimum burst pressure 5000 p.s.i. Accumulated water capacity 9.5 cu. in. 1/4" o'ring ports, 1/8" npt drain port.
I was trying to think of that website. $178 sounds like a decent deal on a 21" filter tower, but I would like to see a photo of it to see what it is. I have been trying to find something for Eben but the local compressor supply shop hasn't been very good about getting back to me with my request for something similar!Vintagediver wrote:....Jim Shelden who is a wealth of knowledge when it comes to compressors. You can contact him at his website which is: http://www.sheldensportinggoods.com or you can call him at: (316)992-0505 After I obtained my Cornelius compressor I wanted to add a filtration tower and I purchased a 21" unit from him which also has a bleed valve that allows me to blow off any condensate. If I recall correctly I believe I paid $178.00 for this filter / separator, and the best thing about it is that it has a user refillable cartridge to put your filtration material; charcoal, hopcalite, etc. Best of luck with your project! Terry Stevens
Users browsing this forum: No registered users and 0 guests