shack1030
New Member
Posts: 3
Joined: Sat May 25, 2019 1:33 pm
First Name: John
Location: Spotsylvania VA

Hookah Attachment

Fri May 31, 2019 3:16 pm

Looking for two "Hookah attachment nuts" to attach a hookah line to two of my Aqua Master regulators. I know I can rig one up at the gas supply store, but one of the blog posts shows a custom made nut that is for this purpose. Anyone got a couple they are willing to sell?

John

User avatar
captain
Plank Owner
Posts: 1359
Joined: Mon Jul 04, 2005 11:32 am
Location: LaPlace, LA

Re: Hookah Attachment

Sat Jun 01, 2019 10:30 am

It's the nut used to connect an oxygen welding hose to the torch and regulator. Not sure how "custom" you can get with a simple nut other than material of construction. The welding one are brass.
Captain

User avatar
rhwestfall
Master Diver
Posts: 474
Joined: Thu Jan 16, 2014 2:34 pm
First Name: Robert
Location: "La Grande Ile"

Re: Hookah Attachment

Sat Jun 01, 2019 12:07 pm

Is he talking about a hookah port adapter, or something else?
Bob

No Longer Awaiting my Kraken.....

User avatar
captain
Plank Owner
Posts: 1359
Joined: Mon Jul 04, 2005 11:32 am
Location: LaPlace, LA

Re: Hookah Attachment

Sat Jun 01, 2019 2:54 pm

Captain

User avatar
simonbeans
VDH Moderator
Posts: 909
Joined: Sat Jun 25, 2005 2:00 pm
First Name: Allan
Location: Rochester NY

Re: Hookah Attachment

Tue Jun 04, 2019 9:18 am

shack1030 wrote:
Fri May 31, 2019 3:16 pm
Looking for two "Hookah attachment nuts" to attach a hookah line to two of my Aqua Master regulators. I know I can rig one up at the gas supply store, but one of the blog posts shows a custom made nut that is for this purpose. Anyone got a couple they are willing to sell?

John
John,
Email me, [email protected]
Allan
Check out my website: www.vintagescubastuff.com

User avatar
simonbeans
VDH Moderator
Posts: 909
Joined: Sat Jun 25, 2005 2:00 pm
First Name: Allan
Location: Rochester NY

Re: Hookah Attachment

Fri Jun 07, 2019 12:14 pm

Apparently you don't need the adapters.
Check out my website: www.vintagescubastuff.com

User avatar
antique diver
Master Diver
Posts: 1864
Joined: Sun Dec 10, 2006 12:50 pm
First Name: Bill
Location: North-Central Texas

Re: Hookah Attachment

Sat Jun 08, 2019 12:40 pm

simonbeans wrote:
Fri Jun 07, 2019 12:14 pm
Apparently you don't need the adapters.
That happens to me too, Allan. Usually after I spend two hours looking for something. 😕
The older I get the better I was.

shack1030
New Member
Posts: 3
Joined: Sat May 25, 2019 1:33 pm
First Name: John
Location: Spotsylvania VA

Re: Hookah Attachment

Fri Jun 21, 2019 3:41 pm

Went to the local gas supply house and they fabricated a hose for me. One side has a Quick Disconnect to attach to my air hose coming from my AirLine surface air supply. Total cost of the hose fabrication was $6.95. not including QD. Hose is food grade, 2000 psi rated. I think it will hold. :D Will see if it works this weekend.
Hose.jpg
You do not have the required permissions to view the files attached to this post.

User avatar
simonbeans
VDH Moderator
Posts: 909
Joined: Sat Jun 25, 2005 2:00 pm
First Name: Allan
Location: Rochester NY

Re: Hookah Attachment

Fri Jun 21, 2019 8:25 pm

Well, good for you.
Check out my website: www.vintagescubastuff.com

Return to “New Vintage Equipment Diver's Forum”

Who is online

Users browsing this forum: No registered users and 4 guests