stephenws
Skin Diver
Posts: 46
Joined: Wed Feb 05, 2014 8:45 pm
First Name: Stephen
Location: Davenport IA

Argonaut Wings

Sun Dec 30, 2018 8:18 am

Can someone tell me if the Argonaut Wings require a single tank adapter (STA)?

I'm getting back into diving and have a lot of Halcyon backplate/harness equipment which requires a metal STA that positions the tank further away from my back. I'm guessing this isn't a good thing for double hose diving.

I will be ordering a Kraken reg and am thinking I should also get an Argonaut wing - probably the 35# wing, as most of my diving is in cold water with semi-dry or drysuit.

Any info or advice appreciated. Thanks.

- Steve

User avatar
Herman
VDH Moderator
Posts: 1187
Joined: Thu Oct 25, 2007 1:45 pm
Location: Raleigh NC

Re: Argonaut Wings

Sun Dec 30, 2018 9:09 am

I don't know anyone who is using a STA with the VDH wing on a VDH back plate and have not heard of anyone using one with any other plate. If you are using a DH reg then you definitely don't want anything that will move the tank farther from your back. With a DH reg, the closer the better.
Herman

User avatar
Drado
Master Diver
Posts: 638
Joined: Mon Feb 07, 2011 6:11 am
First Name: Eduardo
Location: Manila, Philippines

Re: Argonaut Wings

Sun Dec 30, 2018 9:41 am

From photos of the wing, it looks like they have incorporated some anti-roll system where the cam bands go through. I would say that no STA is needed.
_______________________________
Ed

User avatar
Bryan
Plank Owner
Posts: 5213
Joined: Fri Jun 24, 2005 11:40 am
First Name: Bryan
Location: Wesley Chapel Florida
Contact: Website

Re: Argonaut Wings

Mon Dec 31, 2018 6:26 am

No single cylinder adapter is needed. Roll control built into the wing itself. Even without that I've never used a STA on any wing I've had in the past.
Doing it right should include some common sense, not just blindly following specs and instructions. .Gary D, AWAP on SB

tbone1004
Lung Diver
Posts: 72
Joined: Tue Aug 26, 2014 9:44 am
First Name: Tom

Re: Argonaut Wings

Mon Dec 31, 2018 9:24 am

also of note, you really don't want to use a STA on the VDH backplate since there is no spine recess. The bolts will be uncomfortable and likely dangerous.

No need for STA though my Freedom plate has one integrated so I use it that way

User avatar
Ron
Site Admin
Posts: 1663
Joined: Mon Oct 20, 2008 5:51 pm
First Name: Ron
Location: Puget Sound, Washington
Contact: Website

Re: Argonaut Wings

Mon Dec 31, 2018 12:22 pm

In addition to what has already been said I'd offer that a single tank adapter is now mostly considered old technology. I haven't had one for at least 5-6 years. They were originally for the era when wings were all for doubles and you only used a backplate and wing with singles out of necessity. Pretty much all modern wings have roll control in them now. I think just some Halcyon and Dive Rite stuff still uses them. I've never really understood the use case for a STA in the modern era.
The impossible missions are the only ones which succeed. -JYC

Return to “New Vintage Equipment Diver's Forum”

Who is online

Users browsing this forum: No registered users and 1 guest