Cleaning Solution

[wncdiver]

Preparing to rebuild my first J-Valve and wondered what others have used for a home based cleaning solution. I don't have access to a ultrasonic cleaner so it will pretty much just be soaking. Thanks.

[Bryan]

For salt and verdigris I use Salt X, hot water ,Simple Green and a bolt brush. Give the parts a good long soak and thorough rinse and you should be ready to re assemble

[swimjim]

FWIW you can buy an ultra sonic cleaner pretty cheap. Check Amazon.

[wncdiver]

Thanks Bryan I appreciate it.

Sent from my GT-P5210 using Tapatalk

[wncdiver]

Swimjim- You are right probably need to invest in one.

Sent from my GT-P5210 using Tapatalk

[Herman]

Harbor Freight has an US cleaner in the $80 range...and if you watch they always have specials and coupons. Be sure to get the larger one since you will want to do DH cans. For a cleaning solution, I use a 50/50 mix of white vinegar and water, Just don't let it set too long, it will attack chrome if it's not in good shape.

[wncdiver]

Thanks Herman, I'll keep a eye on the Harbor Freight specials.