User avatar
2THDIVR
Master Diver
Posts: 144
Joined: Sat Jan 02, 2010 4:01 pm
First Name: Scott
Location: Venice,FL

Filter Pads

Wed Dec 01, 2021 6:57 pm

I searched but didn't find any results.
What felt should I get to make my own pads?

Thanks
Scott

User avatar
couv
Master Diver
Posts: 453
Joined: Tue Jul 18, 2006 10:26 pm

Re: Filter Pads

Thu Dec 02, 2021 2:25 am

The store bought pads I've purchased are 1/4" polyester felt pads.
https://scubacompressor.com/?search_in= ... =felt+pads

So if you're going to cut your own I suppose you could get the same material and thickness from Mc Master Carr and cut to fit your cartridge/filter housing.
https://www.mcmaster.com/filters/materi ... ster-felt/

Good luck and keep us posted.
A sincere THANK YOU to all at VDH who make this wonderful resource available and to all the thoughtful contributors.

User avatar
SurfLung
Master Diver
Posts: 1763
Joined: Sat Jan 01, 2011 2:03 pm
First Name: Eben
Location: Alexandria, MN
Contact: Website

Re: Filter Pads

Thu Dec 02, 2021 3:45 pm

Filtertechs has pre cut pads as well as pad material to cut your own. Here's the link

https://filtertechs.com/product-categor ... late-pads/
SurfLung
The Freedom and Simplicity of Vintage Equipment and
Vintage Diving Technique are Why I Got Back Into Diving.

Return to “Compressor Talk”

Who is online

Users browsing this forum: No registered users and 32 guests