-
sthtxdiver
- Master Diver
- Posts: 299
- Joined: Sat Dec 02, 2006 2:57 pm
- Location: Gods country
- Contact: AOL
Re: New Member Hello!
Welcome Aboard my friend .kind regards from the lone star state best regards
Charlie
-
8dust
- Master Diver
- Posts: 551
- Joined: Wed Aug 05, 2009 11:39 am
- Location: Nashville's North Shore
-
SurfLung
- Master Diver
- Posts: 1763
- Joined: Sat Jan 01, 2011 2:03 pm
- First Name: Eben
- Location: Alexandria, MN
- Contact: Website
Re: New Member Hello!
Nice job on the Cornelius. Yes, the download of plans would be really neat.
SurfLung
The Freedom and Simplicity of Vintage Equipment and
Vintage Diving Technique are Why I Got Back Into Diving.
The Freedom and Simplicity of Vintage Equipment and
Vintage Diving Technique are Why I Got Back Into Diving.
-
Bryan
- Plank Owner
- Posts: 5279
- Joined: Fri Jun 24, 2005 11:40 am
- First Name: Bryan
- Location: Wesley Chapel Florida
- Contact: Website
Re: New Member Hello!
Posted in the manuals and catalog section September 2010SurfLung wrote:Nice job on the Cornelius. Yes, the download of plans would be really neat.
Cornelius Compressor Download
Doing it right should include some common sense, not just blindly following specs and instructions. .Gary D, AWAP on SB
-
scubasteve59
- Master Diver
- Posts: 208
- Joined: Fri Jul 08, 2011 10:34 am
- First Name: Steve
- Location: Florida
Re: New Member Hello!
What you have in the files are the tech manual info. I have the photocopied PDF PM "how to" convert plans from 1957 if you want it and another set of plans as well from a later date. They different documents from what you have.
-
SeaHuntJerry
- Master Diver
- Posts: 420
- Joined: Sat Jul 02, 2005 12:45 am
- Location: Minneapolis
Re: New Member Hello!
Hi Steve,
That compressor is really sweet.Cornelius was here in Minneapolis Mn.
My friend Guy has one and the third stage gasket keeps blowing out.
Dave from our Inland Divers Vintage club is going to try a copper one next.
E mail me if you want to dive the springs this fall.
Jerry
That compressor is really sweet.Cornelius was here in Minneapolis Mn.
My friend Guy has one and the third stage gasket keeps blowing out.
Dave from our Inland Divers Vintage club is going to try a copper one next.
E mail me if you want to dive the springs this fall.
Jerry
-
capn_tucker
- Master Diver
- Posts: 707
- Joined: Mon Jan 15, 2007 9:04 am
- Location: Southeast GA
Re: New Member Hello!
Welcome aboard! As Rob said, many of us can be found at the Fl springs. You can very often find Ron and myself at Ginnie, Troy or the Blue Grotto. For a first doublehose project, Mistrals and Aquamasters are dime a dozen on the Bay. And all parts are available from Bryan..
Quick Robin, to the Voitmobile!
Return to “General Discussions”
Who is online
Users browsing this forum: No registered users and 192 guests