I have had a couple of people ask me about making a DA/ Broxton IP gauge. I had made one in the past but it was a real pain to make, mainly because of the vent valve I had to make for it. Recently I was ask again and it occurred to me to simply use a standard second stage and hose that the user supplied. So, here is what I have come up with. The horseshoe and LP orifice is removed from the regulator and the IP gauge is screwed in place. The price will be $25 in the new catalog which I hope to have available very shortly.
IMG_1123web.jpg
IMG_1124web.jpg
IMG_1128web.jpg
You do not have the required permissions to view the files attached to this post.