ubxdiver
Diver
Posts: 23
Joined: Sun Aug 26, 2012 4:22 pm
First Name: John
Location: Virginia

Conshelf XII adjusting screw

Tue Mar 05, 2019 10:14 pm

I've got a Conshelf XII with an 3/8" Allen Wrench intermediate pressure adjusting screw. When did the adjusting screw change to a slot screw?

User avatar
Bryan
Plank Owner
Posts: 5279
Joined: Fri Jun 24, 2005 11:40 am
First Name: Bryan
Location: Wesley Chapel Florida
Contact: Website

Re: Conshelf XII adjusting screw

Wed Mar 06, 2019 7:34 pm

When Aqua Lung ran out of hex head adjustment screws
Doing it right should include some common sense, not just blindly following specs and instructions. .Gary D, AWAP on SB

User avatar
rhwestfall
Master Diver
Posts: 631
Joined: Thu Jan 16, 2014 2:34 pm
First Name: Robert
Location: "La Grande Ile"

Re: Conshelf XII adjusting screw

Thu Mar 07, 2019 8:14 am

that was just plain funny....
Bob

No Longer Awaiting my Kraken.....

User avatar
Ron
Site Admin
Posts: 1748
Joined: Mon Oct 20, 2008 5:51 pm
First Name: Ron
Location: Puget Sound, Washington
Contact: Website

Re: Conshelf XII adjusting screw

Thu Mar 07, 2019 11:00 pm

This is anecdotal, but I've had tons of conshelves over the years and the changeover point appears to be between the XI and XII. I've seen XI's with straight slot or hex adjusting screws, but all my XII's had straight slots. So...1971 ish.
The impossible missions are the only ones which succeed. -JYC

ubxdiver
Diver
Posts: 23
Joined: Sun Aug 26, 2012 4:22 pm
First Name: John
Location: Virginia

Re: Conshelf XII adjusting screw

Sat Mar 09, 2019 1:44 pm

Thanks Ron

Return to “Single Hose Regulators.”

Who is online

Users browsing this forum: No registered users and 4 guests