jconley
Skin Diver
Posts: 25
Joined: Fri Jun 17, 2016 1:24 am
First Name: Jeff
Location: Apex NC

Difference Between Scubapro MK2 and MK200

Wed Jan 03, 2018 10:29 pm

What is the difference between the Scubapro MK2 and the MK200? Can the service kit for a MK2 be used for a MK200?

User avatar
couv
Master Diver
Posts: 453
Joined: Tue Jul 18, 2006 10:26 pm

Re: Difference Between Scubapro MK2 and MK200

Thu Jan 04, 2018 12:55 pm

The same kit can "almost" be used. The piston head o-rings are different sizes. The stem o-ring and hp seat are the same; however, MK200 piston head takes a -023 o-ring where the MK2 uses a -022.

From the Scubapro website (timeline):

The MK200 is a slightly different version of the MK2. It has a piston head that is slightly larger than the MK2. The MK 200 has three low pressure ports, one high pressure port, a large yoke and black knob with a MK200 sticker. There were two versions: the first version, 1988-1991, has an S.P.E.C. cap and an optional rubber S.P.E.C. boot was offered for this regulator and would also fit the end cap of a MK2 first stage.
A sincere THANK YOU to all at VDH who make this wonderful resource available and to all the thoughtful contributors.

User avatar
Herman
VDH Moderator
Posts: 1315
Joined: Thu Oct 25, 2007 1:45 pm
Location: Raleigh NC

Re: Difference Between Scubapro MK2 and MK200

Thu Jan 04, 2018 2:07 pm

Thank for the info Couv.. Jeff, I may have some of the orings and if not, getting them is not a problem.
Herman

kworkman
Master Diver
Posts: 344
Joined: Thu Aug 08, 2013 4:17 pm
First Name: Keith
Location: Columbus, OH

Re: Difference Between Scubapro MK2 and MK200

Fri Jan 05, 2018 6:29 am

i have an mk200 if you want it. Free of charge.

User avatar
couv
Master Diver
Posts: 453
Joined: Tue Jul 18, 2006 10:26 pm

Re: Difference Between Scubapro MK2 and MK200

Fri Jan 05, 2018 11:52 am

I'll take it and pay for shipping.
A sincere THANK YOU to all at VDH who make this wonderful resource available and to all the thoughtful contributors.

User avatar
Herman
VDH Moderator
Posts: 1315
Joined: Thu Oct 25, 2007 1:45 pm
Location: Raleigh NC

Re: Difference Between Scubapro MK2 and MK200

Fri Jan 05, 2018 12:28 pm

Couv,

Do you have any of the 022 and 023s you care to trade for? I don't have any of those but do have a pretty big selection otherwise.
Herman

User avatar
couv
Master Diver
Posts: 453
Joined: Tue Jul 18, 2006 10:26 pm

Re: Difference Between Scubapro MK2 and MK200

Fri Jan 05, 2018 10:23 pm

Sure, email me with your snail mail address and I'll send some of each out to you.


Edit: I found your address and the seals are on the way.
A sincere THANK YOU to all at VDH who make this wonderful resource available and to all the thoughtful contributors.

Return to “Single Hose Regulators.”

Who is online

Users browsing this forum: No registered users and 24 guests