divemh
New Member
Posts: 3
Joined: Mon May 18, 2015 10:24 pm
First Name: Michael
Location: Fort Myers FL

Mid 90s Nemrod

Mon May 18, 2015 10:58 pm

I know it's not technically a vintage reg. But hopefully someone may be able to help. trying to track down a high pressure seat for a mid 90s sst nemrod 1st stage. I have been able to find all the parts to do the service on it, except the high pressure seat. It has a larger diameter then most, dacor, agua lung ect. And it is a two piece seal. Any leads would be appreciated, I have looked everywhere I can think of, and searched the web. It's only one of my backups but not ready to throw it away. I figure there is some old new stock somewhere. Or someone knows of a seat that will work. Thanks!

User avatar
Ron
Site Admin
Posts: 1748
Joined: Mon Oct 20, 2008 5:51 pm
First Name: Ron
Location: Puget Sound, Washington
Contact: Website

Re: Mid 90s Nemrod

Tue May 19, 2015 9:36 pm

Could you post some pictures? That would help. Pictures of the regulator, label, and HP seat would be especially helpful.
The impossible missions are the only ones which succeed. -JYC

User avatar
USdiver
Master Diver
Posts: 352
Joined: Sat Apr 25, 2009 5:14 pm
Location: Cincinnati, Ohio

Re: Mid 90s Nemrod

Tue May 19, 2015 10:25 pm

Divemh,

Forum member annectens (Enrique) lives in Barcelona, home of Nemrod. He may be able to direct you to where to find late model Nemrod parts.

Also check out these boys: http://www.hdses.com

I'll bet that between the two you'll find your hp seat.

BTW, welcome to the Tribe.

George
Too DAAM Many double hoses, It's not a hobby, it's an addiction.

divemh
New Member
Posts: 3
Joined: Mon May 18, 2015 10:24 pm
First Name: Michael
Location: Fort Myers FL

Re: Mid 90s Nemrod

Tue May 19, 2015 11:31 pm

Thanks, I figure there have to be a few parts over seas, and I will post a few pick tomorrow.

divemh
New Member
Posts: 3
Joined: Mon May 18, 2015 10:24 pm
First Name: Michael
Location: Fort Myers FL

Re: Mid 90s Nemrod

Thu May 21, 2015 5:26 pm

I can't seem to get my camera to take a pic, under the download size required.

Return to “Single Hose Regulators.”

Who is online

Users browsing this forum: No registered users and 20 guests