Moderator: Greg Barlow
tripplec wrote:I picked up a Voit Titan II first stage with swimaster titan II second stage. They do NOT say mr12. Does anyone know if the MR12 repair kit on VDH will work?
I may have not been clear with my discription. You have 2 choices, completely remove the J vavle assembly and replace it with the plug that came with some of the models (part# 72 or 73) OR you can remove the plastic seat from the J valve assembly and reinstall the complete assembly without the seat, the J valve will not function with the reserve but it will pass air and there is no chance of loose plastic getting into the reg, you keep the look but not the function.tripplec wrote:mine does have the j valve, disabling it and just replacing the seat would be fine with me. If I could get the second stage diaphragm that would be good to.
Herman wrote:I may have misspoke. I was thinking the new MR-12 but looking at the MR-12 kit, it appears to have the orings for the older models as well. Specifically I was thinking about the HP assembly oring - part# 10 (size 908). If that one is in the kit, all you need besides the kit is a HP seat. I would also recommend replacing the second stage diaphragm if you intend to dive it much.
Return to “Single Hose Regulators.”
Users browsing this forum: No registered users and 41 guests