Looking for a diaphragm or at least the missing exhalation valve and a couple of orings
.
Moderator: Greg Barlow
antique diver wrote:Isn't that what Hannes Keller used for his dive out of a bell into 1000' of water off Catalina in 1962?
Could I do the same thing with my Dad's 1961 Voit 40 fathom? It looks identical to the Calypso in the picture.slonda828 wrote:If you have the center metal disc in your picture, then you can use any silicone conshelf diaphragm and off the shelf exhaust valves to rebuild it.
SurfLung wrote: Could I do the same thing with my Dad's 1961 Voit 40 fathom? It looks identical to the Calypso in the picture.
slonda828 wrote:The similar model Voit will work.)
I don't sell a 7/8th valve which would be around a 22mm....I think Ron is talking about using the 26mm for the exhaust valve on the diaphragm.frogman63 wrote:I am in the same process of fixing up my '64 1030 Calypso second stage. The closest exhaust valve that I see in the store is 26 mm. Do you know what section of the store has the 7/8 inch exhaust valve? Thanks.
Return to “Single Hose Regulators.”
Users browsing this forum: No registered users and 43 guests