Forum rules
Regulator specific information can also be found on the main page of the website in the Regulator Id Guide.
User avatar
Bryan
Plank Owner
Posts: 5206
Joined: Fri Jun 24, 2005 11:40 am
First Name: Bryan
Location: Wesley Chapel Florida
Contact: Website

Re: Removing/installing C clips

Tue Sep 29, 2009 6:39 pm

Here are the tools I use. Tom's nippers/cutters etc are more refined than mine and I am sure work more smoothly. The Vice Grips I ground down with a round Dremel bit and I crimp each clip a little at a time adjusting the pressure slightly. Usually twice around gets them tight enough....
Image
Image
Image
Image
Image
Doing it right should include some common sense, not just blindly following specs and instructions. .Gary D, AWAP on SB

barrasota

Re: Removing/installing C clips

Fri Oct 02, 2009 9:34 am

Thank you Bryan for the pictures and the explanation
Thanks, Dude, Luis and Dan for giving me more ideas

I got the plyers and have to ground the jaws this weekend

Bye

User avatar
antique diver
Master Diver
Posts: 1642
Joined: Sun Dec 10, 2006 12:50 pm
First Name: Bill
Location: North-Central Texas

Re: Removing/installing C clips

Sat Oct 03, 2009 11:27 pm

To help prevent marring the sides of the clips during removal I ground the tips of a pair of ViseGrips smooth. They still hold the clips firmly enough to remove them, an no more ugly grooves and scratches in the clips.

Now I'll customize another pair of VG's with the curved shapes for installation... thanks for the great idea.
"I get plenty of excercise just pushing my luck!"

Return to “Technical Information / Diver Training Information”

Who is online

Users browsing this forum: No registered users and 1 guest